ARAI GP-6 S M6 RACING HELMET
-270x270.jpg)
Product Description
ARAI GP-6 S Racing Helmet
Simply put, it’s hard to imagine a better racing helmet. Combine Arai’s proprietary, groundbreaking PBcLc (Peripherally Belted Complex Laminate) shell construction -- the same shell shape as the F-1-grid’s GP-6RC model; a wider eye port for optimized peripheral vision; new ventilation; and on and on – and you get the striking new Arai GP-6(PED). The new shell gives you incredible strength and flexibility, and that strength allows Arai to use an extremely soft EPS liner that’s so comfortable it’ll make you think more about a nap than a race. Right until you strap in, that is. The cheek pads are replaceable for a more personal fit. Up top, the ventilation system is greatly improved with three larger, closeable intake vents, plus two larger exhaust cowls.
Now Snell SA2015 certified, with the M6 washer/nut installed at the factory. With the 6mm washer/nut installed, anyone can now easily install a variety of Head and Neck Restraint systems that use a 6mm bolt to their helmet.
This helmet also comes with the FIA-8859-2015 certification sticker applied to the interior liner of the helmet.
ARAI GP-6 S Racing Helmet Specs and Features:
POSITIVE SHIELD LATCH
Positive latch mechanism provides Solid shield latching, while allowing normal operation of the shield. Designed to be an integral component of the shield system and function, not just an add-on afterthought. The simplicity of the function masks the complexity of the design.
Positive latch mechanism provides Solid shield latching, while allowing normal operation of the shield. Designed to be an integral component of the shield system and function, not just an add-on afterthought. The simplicity of the function masks the complexity of the design.
NEW SHIELD PIVOT HARDWARE
New shield pivot hardware, with redesigned track slider that improves aerodynamics. New wider 6 series shield & eye port, for increased peripheral field of view when compared to the previous 5 series. Shield, pivot hardware and wider eye port were developed on the RC and adapted to the GP-6PED.
New shield pivot hardware, with redesigned track slider that improves aerodynamics. New wider 6 series shield & eye port, for increased peripheral field of view when compared to the previous 5 series. Shield, pivot hardware and wider eye port were developed on the RC and adapted to the GP-6PED.
WIDER EYEPORT
Wider eye port for increased peripheral field of view, when compared to the previous GP-5 series.
Wider eye port for increased peripheral field of view, when compared to the previous GP-5 series.
VENTILATION
Large, closeable, intake vents combined with larger 10mm holes greatly increase air intake. Larger 10mm rear vent holes, with larger cowls, increases airflow even further.
Large, closeable, intake vents combined with larger 10mm holes greatly increase air intake. Larger 10mm rear vent holes, with larger cowls, increases airflow even further.
M6 ANCHOR TYPE
Integrated seats to accommodate a variety of Head and Neck Restraint devices. Pre-Installed M6 threaded washer/nut, with 6mm threads, to accept a variety of anchors systems for variety of Head and Neck Restraint devices and make installation much easier for people not familiar with such installations. Flat surface area around the mounting nut to allow the anchor post base to rest flush with the helmet surface around the entire perimeter of the anchor base. FIA-8859-2015 certification sticker applied to the interior liner material.
Integrated seats to accommodate a variety of Head and Neck Restraint devices. Pre-Installed M6 threaded washer/nut, with 6mm threads, to accept a variety of anchors systems for variety of Head and Neck Restraint devices and make installation much easier for people not familiar with such installations. Flat surface area around the mounting nut to allow the anchor post base to rest flush with the helmet surface around the entire perimeter of the anchor base. FIA-8859-2015 certification sticker applied to the interior liner material.
NEW CHINBAR
Newly sculpted chin bar and ridge along lower edge of shell to improve structural integrity. Provides a stronger shell near the opening where it is needed, as well as lowers the center of gravity. Rise in shell above the shoulders for added clearance.
Newly sculpted chin bar and ridge along lower edge of shell to improve structural integrity. Provides a stronger shell near the opening where it is needed, as well as lowers the center of gravity. Rise in shell above the shoulders for added clearance.
E-JECT READY CROWN PAD
Pre-cut pocket, under crown pad, can be easily removed to accommodate optional E-Ject(R) system.
Pre-cut pocket, under crown pad, can be easily removed to accommodate optional E-Ject(R) system.
GP-6 S Racing Helmet Sizing
When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.
The total time it takes to receive your order is shown below:
The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.
Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.
Shipping from your local warehouse is significantly faster. Some charges may apply.
In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!