Search

MyChron 5/4 2T Patch Cable-H2O Temp & EgtAiM Y-Cable is designed for the MyChron5 and MyChron 4  2T kart dash. It has a 7-pin male 712 (screw-in) connector for the dash, one K-type (2-pin flat yellow) female connector to accept a K-type thermocouple, and a 4-pin female 719 (push-in) connector for a thermoresistor temperature sensor li..

MyChron5 & 4 2T Y-Cable, CHT & EGTOne of the most common uses of this cable is to use an under the spark plug cylinder head temperature (CHT) and an exhaust gas temperature (EGT). We use this on a Yamaha KT100, LO206, Animal or clone motor to record both CHT & EGT as our two temperature inputs.AiM Y-Cable is designed for the MyChron5 2T..

AIM MyChron 719 to 3-pin 712 Adapter Cable Only for Rotax Temp SensorThis patch cable has a 719 push-on connector at one end and a 3-pin 712 screw-in connector at the other. It is only used in karting applications, usually with the Rotax engine. This is the same cable included with the AiM Rotax Water Temperature Sensor Kit (Par..

AIM MyChron Thermocouple Patch CableAiM MyChron Thermocouple Patch Cable, part number AiM V03CCB15M has a 3 Pin 712 (thread-on) male connector with a K-Type (two blade flat yellow) female connector on the other end. This patch cable is used to connect the AiM Mychron 3/4/5 dash to your AiM thermocouple K-Type connector.AiM MyChron Thermocouple Patc..