How does the Roux Helmet Cooling Work? Great question that is answered with both a simple and complex answer. Starting at the helmet, Roux uses a one-piece block that connects to the two dry-break fittings located on the right side of your Roux R-1 Composite and Carbon helmets. The fiberglass helmets do not have the Cool-X option, so this works wit..

Analogous to the brim of a hat, the Roux Peak Visor in Glossy Carbon is designed to keep the sun out of your eyes.  Roux Glossy Carbon peak visors will fit your your Roux R-1 Helmet perfectly using the same female threads that your visor screws into. All of our Roux accessories are Genuine Roux brand to guarantee quality and years of service.R..

Bell designed the Top Air Eyeport for the HP7, HP5, GT5 Carbon, GT5, RS7C LTWT, RS7 Carbon, and RS7 Pro helmets to allow these models to be adapted for use as a top forced air helmet. The innovative design allows air to flow around the top of the helmet using the helmet’s ventilation channels while also diverting air into the eyeport area for maxim..

The 8 Hole Top Air is designed to utilize the top ventilation channels on the HP7, HP5, GT5 Carbon, GT5, RS7 Carbon, and RS7 Pro helmets to allow these models to be adapted for use as a top forced air helmet. The 8 Hole Top Air design directs airflow only around the top of the helmet and is effective for drivers who are sensitive to airflow around ..

Connecting to the left side of your Roux helmet, the Roux NASCAR radio plug/drink tube connector attaches to your helmet with a slight push and releases quickly by pressing the red fast release push button on the Roux helmet connector assembly. This is the NASCAR protocol (3c) that is used in most older radio systems. The drink tube is open en..

Connecting to the left side of your Roux helmet, the Roux IMSA radio plug/drink tube connector attaches to your helmet with a slight push and releases quickly by pressing the red fast release push button on the Roux helmet connector assembly. This is the IMSA protocol (4c) that is used in most modern radio systems. The drink tube is open ended..

ARAI GP-6RC, GP-6 PED, GP-6 S, SK-6  ShieldGold, Blue, Silver and Green mirror coated shield for the 6 series Arai Racing helmet. *Colors may vary between production runs. **Iridium and tinted shield daylight use only!. WARNING: do not wipe off the coated surface as it damages the coating. Never use petrol, thinner, benzene, or any other..

TOP AIR SYSTEM KIT The exclusive Stilo “Top Air System” takes fresh air to the driver’s head and nose. With the innovative system for the air flow regulation you can favor the air flow on the driver’s face for a better breathing or for cooling the driver’s head. The Top Air System can be fitted onto ST5 Formula and GT models. Thanks to the fi..

The SE07 3mm shield is an injection-molded optically correct polycarbonate face shield with double screen anti-fog insert for superior fog control. The SE07 3mm shield uses the SV (SE07) pivot kit, is compatible with tearoffs, and is available in a variety of colors. Compatible with the HP7, RS7 Carbon, RS7 Pro, and RS7-K...

The SE05 3mm shield is an injection-molded optically correct polycarbonate face shield. The SE05 3mm shield uses the SV (SE03/SE05) pivot kit, is compatible with tearoffs, and is available in a variety of colors. Double Screen Anti Fog (DSAF) inserts are available separately to improve fog control. Compatible with the HP5, GT5 Carbon, and GT5...

The SE03 3mm shield is an injection-molded optically correct polycarbonate face shield with double screen anti-fog insert for superior fog control. The SE03 3mm shield uses the SV (SE03/SE05) pivot kit, is compatible with tearoffs, and is available in a variety of colors. Compatible with the GTX3 Carbon, GTX3, GP3 Carbon, and GP3...

Designed for use with the HP7 and HP5 helmets, the Forced Air Top Low Profile Intake with the QL (V10) nozzle is designed for use in vehicles with limited space above the driver...

Description: Black with Grey Accents, Red Stitching and Tags •YKK zippers •1 Large Expansion Zipper Fold •Ventilated Base with 8 vents •ID Holder •Roux Quick Attach System mates with Roux Racer Utility Backpack (RXB03-15542) •Padded Handle •Stitched Neoprene Soft Top •Roux Gear Bag Handle Slide Strap&nbs..

Alternate 12v Power supply for the WRC and Trophy intercom systems. To be used in emergency situations where your primary power supply becomes inoperative. Convert your WRC and Trophy intercom from 9 volt battery power to run off your cars 12 volt supply. With this adaptor you will never loose communication half way through a stage due to a run..

Arai PED Kit - ClearArai PED (Performance Enhancing Device) kit for your GP-5, GP-6, or SK-6 helmet. Give yourself a clear performance enhancement. Kit includes double-sided mounting tape already installedArai PED Kit - Clear Details:Manufacturer: AraiManufacturer part number: 10-2064Manufacturer alternate part number: 2064Manufacturer alterna..