Arai PED Kit - ClearArai PED (Performance Enhancing Device) kit for your GP-5, GP-6, or SK-6 helmet. Give yourself a clear performance enhancement. Kit includes double-sided mounting tape already installedArai PED Kit - Clear Details:Manufacturer: AraiManufacturer part number: 10-2064Manufacturer alternate part number: 2064Manufacturer alterna..

INFRARED Sensor – 40cmDesigned to detect our the coded infrared beams of the ALFANO transmitter, ref. A4100Note : this article is delivered in the box with the PROIIIevo, ref. A1021..

EXHAUST sensor “K” – 40cm “STANDARD quality, blue label”This K thermocouple technology sensor must be installed on the exhaustRead the explanation on the installation and use of this sensor, the document is in the SUPPORT rubricNote : this sensor must be used with an extension cable ref. A3401 or a hub ref. A2190..

Tire Pressure Gauge - includes both angle and ball chucks and dual bleed buttons for faster setting.Huge 3 1/2" Glow-in-the-Dark face for high accuracy and the easiest readabilityDual air pressure release buttons for faster settingSwivel angle chuck installed with alternate ball chuck includedHOLDS PRESSURE READING UNTIL RELEASEDInternal gauge..

AIM MyChron Rotax Coolant Temperature Sensor M10This thermoresistive Water Temperature sensor is for use with AiM MyChron3, MyChron4 and MyChron 5 and 2T versions of kart dashes. The sensor has M10 male threads for easy installation in Rotax engines. The sensor lead has a 719 push-on connector, that connects to a 3-pin 712 screw-in a..

AIM MyChron EGT Sensor w/ Patch Cable - 2 PieceAiM EGT Sensor Kit with 719 connector. Install this AiM Mychron 4EGT Thermocouple 150mm (5.90") from the exhaust port to accurately measure temperatures ranging from 0 to 1832° F (up to 1000°C).  This is the exact replacement sensor sent with all Aim MyChron Kits.M5 threads allow for com..

AIM Mychron 5 & 4 EGT Thermocouple Sensor - ICC Pipe (KZ/KF Homologated)AiM EGT Sensor designed for KZ & KF homoligated exhaust pipes. Easily connects with any K-Type (two blade flat yellow) connector and threads onto your KZ or KF homologated exhaust pipes sach as IAME, ROK, DeBei, TM and many others. Install this AiM Mychron 3/4/5 EG..

The Tech-1 KX v2 glove is a premium karting glove, designed to deliver high levels of comfort and performance. Featuring external seams for superior comfort and to prevent any excessive pressure points forming on the hands while driving, this glove is equipped with Alpinestars open cuff design with a 180° elasticated wrist for easy entry and a secu..

Alpinestars KX Winter Long Sleeve Top is developed for cold-weather kart racing. Winter kart racing requires a perfect balance of breathability and moisture wicking to keep the driver focused and in-control. Alpinestars Sets the standard in Winter Kart Tops with the Alpinestars KX Winter Kart Racing Long Sleeve Top. You will see them worn by the be..

USB cable specially designed for Downloading data of ALFANO6..

SPEED sensor – 195cmNew model (10-03-2019), this speed sensor can be installed directly on the Alfano 6 and PROIIIevo (in the green connector), without the need to use the A2192 (old model) or A2194 Hub.This sensor can be used on the rear axle or on the front wheel of kartingNote : for those who need an extension to install it on another vehicle, u..

ARROW KThe Arrow K is a boldly styled karting glove that provides incredible grip and superior comfort. Featuring an anatomically correct seamless palm that contours to the natural shape of the hand, the palm of the Arrow K glove uses an Ultra Grip silicon palm that increases grip, comfort and dexterity. The Arrow K has exclusive touch sensitive in..

WATER sensor “NTC” M10 – 45cmThis NTC sensor technology provided with a metric thread 10mm can be connected either on the cylinder head of the engine if it is equipped with an opening designed for installing this sensor either this sensor can be instal on an aluminium adapter, ref. A261, A262, A263, A264Note : this sensor must be used with an exten..

SPARK PLUG sensor “NTC” – D: 14mm /45cmThis NTC technology sensor in normal version should be installed with a 14mm diameter candle.Warning : it is important to remove the sealing washer of the spark plug before installationNote : this sensor must be used with an extension cable ref. A3301 or a hub ref. A2190..

Designed to detect our magnetic strips installed on the tracksNote : this article is delivered in the box with the PROIIIevo. Option for ALFANO6..