Racing Optics tearoffs are a laminated tearoff solution for dirt and pavement forms of racing eliminating the need to apply individual tearoffs. The laminated technology creates a distortion-free optical lens. The XStack™ is a stack of 10 laminated tearoffs that are 2mm thick each. Each package contains 3 stacks of 10 tearoffs for a total of 30 tea..

Bell makes the K1 Pro/GP Chin Bar Gurney for use on Bell models including the GP3 Carbon, GP3, M8 Carbon, M8, GP2 Youth, and K1 Pro. Bell’s chin bar gurneys are designed to reduce lift and add downforce to the front of the helmet and can be used on helmets with or without a duckbill. As airflow goes over the helmet it separates near the shield area..

The Fleece Bag is a plush fleece-lined helmet bag that will protect your helmet from the outdoor elements after racing. Built in mesh toward the top of the bag allows for limited breathability and the single zipper makes the bag simple to use. Great for the weekend warrior...

Racing Optics tearoffs are a laminated tearoff solution for dirt and pavement forms of racing eliminating the need to apply individual tearoffs. The laminated technology creates a distortion-free optical lens. The XStack™ is a stack of 10 laminated tearoffs that are 2mm thick each. Each package contains 3 stacks of 10 tearoffs for a total of 30 tea..

Racing Optics tearoffs are a laminated tearoff solution for dirt and pavement forms of racing eliminating the need to apply individual tearoffs. The laminated technology creates a distortion-free optical lens. The XStack™ is a stack of 10 laminated tearoffs that are 2mm thick each. Each package contains 3 stacks of 10 tearoffs for a total of 30 tea..

Racing Optics tearoffs are a laminated tearoff solution for dirt and pavement forms of racing eliminating the need to apply individual tearoffs. The laminated technology creates a distortion-free optical lens. The XStack™ is a stack of 10 laminated tearoffs that are 2mm thick each. Each package contains 3 stacks of 10 tearoffs for a total of 30 tea..

The SV (SE07, SE077) Pivot Kit is replacement hardware for helmets that use SE07 3mm, SE07 2mm, and SE077 3mm shields. Compatible with the HP77, HP7, RS7C LTWT, RS7SC LTWT, RS7 Carbon, RS7 Pro, RS7-K, KC7-CMR Carbon, and KC7-CMR. Bell recommends using a new hardware kit when replacing the helmet shield and keeping a spare pivot kit around. Availabl..

The SV (SE03/SE05) Pivot Kit is replacement hardware for helmets that use SE03 3mm and SE05 3mm shields. Compatible with the GT5 Carbon, GT5, GT5 Rally Carbon, GT5 Rally, GTX3 Carbon, GTX3, GP3 Carbon, and GP3. Bell recommends using a new hardware kit when replacing the helmet shield and keeping a spare pivot kit around. Available in Black, Silver,..

The SRV-2 Pivot Kit is replacement hardware for helmets that use 276 SRV and 281 SRV shields. Compatible with the BR1 and Sport helmet models. Bell recommends using a new hardware kit when replacing the helmet shield and keeping a spare pivot kit around. Available in Black, Silver, Red, and Blue...

The SRV-1 Pivot Kit is replacement hardware for helmets that use 287 SRV, 288 SRV, 289 SRV, and SRV-8 shields. Compatible with the M8 Carbon, M8, Dominator2, K1 Pro, GP2 Youth, Vador, and Sport EV helmet models. Bell recommends using a new hardware kit when replacing the helmet shield and keeping a spare pivot kit around. Available in Black, Silver..

Some drivers prefer larger aluminum posts that allow them to stack more tearoffs on their shield and are stronger against rocks and dirt. The Aluminum (Standard) Tearoff Post Kit is designed exclusively for Bell shields and are compatible with Racing Optics, Ultra Shield, and Bell 0.25mm tearoffs. The kit installs with a screw and threaded post...

The Hex Wrench Key is designed specifically for Bell shields and is used to change the shield's pivot screws, tighten the friction screws, and adjust the shield lock down button. The Hex Wrench Key is also used to uninstall and install replacement shields. Using this key greatly reduces the likelihood of over-torquing pivot kit bolts and screws and..

Bell offers Cheek Pad Insert Kits in various thicknesses that install in a pocket behind the interior helmet cheek padding. The Cheek Pad Inserts are used to improve the helmet fit for drivers who may have a narrow face or simply prefer a tighter fit in the cheek pad area. These Cheek Pad Inserts are covered with our premium grey fire-retardant fab..

Bell offers Cheek Pad Insert Kits in various thicknesses that install in a pocket behind the interior helmet cheek padding. The Cheek Pad Inserts are used to improve the helmet fit for drivers who may have a narrow face or simply prefer a tighter fit in the cheek pad area. These Cheek Pad Inserts are covered with our standard black fire-retardant f..

Bell sells the Ultra Shield (01223) brand of individual tearoffs with patterns designed exclusively for Bell helmets that use the 287 SRV or SRV-8 shield. This package of tearoffs are in a light smoke tint, are 2mm thin, and include 5 tearoffs per pack. Compatible with the M8 Carbon, M8, Dominator2, K1 Pro, and GP2 Youth...