USB cable specially designed for Downloading data of ALFANO6..

SPEED sensor – 195cmNew model (10-03-2019), this speed sensor can be installed directly on the Alfano 6 and PROIIIevo (in the green connector), without the need to use the A2192 (old model) or A2194 Hub.This sensor can be used on the rear axle or on the front wheel of kartingNote : for those who need an extension to install it on another vehicle, u..

WATER sensor “NTC” M10 – 45cmThis NTC sensor technology provided with a metric thread 10mm can be connected either on the cylinder head of the engine if it is equipped with an opening designed for installing this sensor either this sensor can be instal on an aluminium adapter, ref. A261, A262, A263, A264Note : this sensor must be used with an exten..

SPARK PLUG sensor “NTC” – D: 14mm /45cmThis NTC technology sensor in normal version should be installed with a 14mm diameter candle.Warning : it is important to remove the sealing washer of the spark plug before installationNote : this sensor must be used with an extension cable ref. A3301 or a hub ref. A2190..

Designed to detect our magnetic strips installed on the tracksNote : this article is delivered in the box with the PROIIIevo. Option for ALFANO6..

AIM Mychron 5 & 4 EGT Thermocouple Sensor - Heavy duty M5 w/ header mounting hardware (KZ/KF Homologated)AiM EGT Sensor designed for KZ & KF homoligated exhaust pipes. Easily connects with any K-Type (two blade flat yellow) connector and threads onto your KZ or KF homologated exhaust pipes sach as IAME, ROK, DeBei, TM and many others. ..

AIM MyChron Rotax Coolant Temperature Sensor M10This thermoresistive Water Temperature sensor is for use with AiM MyChron3, MyChron4 and MyChron 5 and 2T versions of kart dashes. The sensor has M10 male threads for easy installation in Rotax engines. The sensor lead has a 719 push-on connector, that connects to a 3-pin 712 screw-in a..

AIM Mychron 5 & 4 EGT Thermocouple Sensor - ICC Pipe (KZ/KF Homologated)AiM EGT Sensor designed for KZ & KF homoligated exhaust pipes. Easily connects with any K-Type (two blade flat yellow) connector and threads onto your KZ or KF homologated exhaust pipes sach as IAME, ROK, DeBei, TM and many others. Install this AiM Mychron 3/4/5 EG..

AIM Mychron 5 & 4 EGT Thermocouple SensorThe K-type (two blade flat) connector on any MyChron thermocouple requires either a MyChron K-Type to 3 Pin 712 Patch Cable (Part No. AIM-MC-008) for Kart dashes or a MyChron K-Type to 4 pin 712 Patch Cable (Part No. AIM-MC-208) for MyChron3 XG-Log Auto dash. MyChron3 Gold Auto and My..

AIM MyChron 14mm CHT Sensor - Underplug Air CooledAiM CHT (Cylinder Head Temperature) Sensor Kit that fits under a 14mm spark plug and has a K-Type connector to go to your AiM Mychron 2T. Install this AiM Mychron 14mm Under Plug CHT sensor under the spark plug of most air cooled engines like the LO-206, Yamaha KT100 and most every Honda out th..

AiM MyChron 14mm CHT Sensor - Underplug Air CooledInstall this CHT Thermocouple between the head and spark plug (under the spark plug hex) to monitor temperatures ranging from 0 to 572° F (up to 300° C). Fits 14mm spark plugs. 0.7" thick sensing ring. 1 meter (40 inch) cable.This is the Briggs LO206 temperature cable to go to your MyChron 4 or MyCh..

MyChron 5/4 2T Patch Cable-H2O Temp & EgtAiM Y-Cable is designed for the MyChron5 and MyChron 4  2T kart dash. It has a 7-pin male 712 (screw-in) connector for the dash, one K-type (2-pin flat yellow) female connector to accept a K-type thermocouple, and a 4-pin female 719 (push-in) connector for a thermoresistor temperature sensor li..

MyChron5 & 4 2T Y-Cable, CHT & EGTOne of the most common uses of this cable is to use an under the spark plug cylinder head temperature (CHT) and an exhaust gas temperature (EGT). We use this on a Yamaha KT100, LO206, Animal or clone motor to record both CHT & EGT as our two temperature inputs.AiM Y-Cable is designed for the MyChron5 2T..

AIM MyChron 719 to 3-pin 712 Adapter Cable Only for Rotax Temp SensorThis patch cable has a 719 push-on connector at one end and a 3-pin 712 screw-in connector at the other. It is only used in karting applications, usually with the Rotax engine. This is the same cable included with the AiM Rotax Water Temperature Sensor Kit (Par..

HUB with 2 inputs : SPEED + MAGNETIC – 20cmNew model, this A2194 Hub replaces the old model A2192.This HUB can simultaneously connect a speed sensor A2201 (old model) or A2203 (new model) + a magnetic sensor A1302Note : this HUB is designed to be plugged to the green connector of PROIIIevo, ALFANO6...