AIM MyChron Brake Pressure Sensor This AIM Brake Pressure Sensor kit allows for precise analysis of braking points, braking technique, and even brake bias calculation.Rather than measuring the position of the brake pedal, this pressure sensors allows for a higher degree of accuracy by measuring actual system pressure.You will also need: ..

AIM MyChron Kart Accelerator/Brake Pedal Position Sensor Kit This sensor uses a magnet to send kart throttle or brake position data to your MyChron5 or MyChron 4 kart data logger. Easy to connect and program the AiM MyChron Kart pedal Position sensor can give accurate data analysis of brake lock-up, and throttle position VS RPM & La..

AIM MyChron Rotax Coolant Temperature Sensor M10This thermoresistive Water Temperature sensor is for use with AiM MyChron3, MyChron4 and MyChron 5 and 2T versions of kart dashes. The sensor has M10 male threads for easy installation in Rotax engines. The sensor lead has a 719 push-on connector, that connects to a 3-pin 712 screw-in a..

AIM MyChron EGT Sensor w/ Patch Cable - 2 PieceAiM EGT Sensor Kit with 719 connector. Install this AiM Mychron 4EGT Thermocouple 150mm (5.90") from the exhaust port to accurately measure temperatures ranging from 0 to 1832° F (up to 1000°C).  This is the exact replacement sensor sent with all Aim MyChron Kits.M5 threads allow for com..

AIM Mychron 5 & 4 EGT Thermocouple Sensor - ICC Pipe (KZ/KF Homologated)AiM EGT Sensor designed for KZ & KF homoligated exhaust pipes. Easily connects with any K-Type (two blade flat yellow) connector and threads onto your KZ or KF homologated exhaust pipes sach as IAME, ROK, DeBei, TM and many others. Install this AiM Mychron 3/4/5 EG..

AIM Mychron 5 & 4 EGT Thermocouple Sensor - Heavy duty M5 w/ header mounting hardware (KZ/KF Homologated)AiM EGT Sensor designed for KZ & KF homoligated exhaust pipes. Easily connects with any K-Type (two blade flat yellow) connector and threads onto your KZ or KF homologated exhaust pipes sach as IAME, ROK, DeBei, TM and many others. ..

AIM MyChron 5 Battery Replacement PackHave a charged extra MyChron 5 battery pack, ready to go. Be ready for anything on the kart track with this rechargeable Lithium battery. You will no longer need to carry with you or worse, locate at your track, your dead MyChron 5 Battery.The MyChron 5 rechargeable battery lasts more than ten hours. Charg..

AIM MyChron 5 Battery Charger, Three PieceMyChron 5 battery charger three piece.  Includes wall charger adapter for USB patch cable, USB charging cable and battery charger.AIM MyChron 5 Battery Charger Three Piece Wall Charger Adapter Details:Manufacturer: AiMManufacturer part number: 3 Piece Adapter..

AIM MyChron Brake Pressure Sensor Fitting "T" For Brake Line This AIM Brake Pressure Sensor fitting "T" for brake line includes Brake Line Ferrel Fittings (2), Compression Nuts (2) and Copper Washers (2) AiM MyChron Brake Pressure Sensor Kit Details:Manufacturer: AiMManufacturer part number: MC-344Compatible with MyChron 4, MyChron4 2T: ..

AIM MyChron 2-Port CAN Data Hub for AIM Mychron5 & 4Extend the capabilities of your AiM MyChron 5/4 (kart) Dash without occupying any more channels or running more cables to your dash. With the 2-Port CAN Data Hub for AIM MyChron 5/4, connect up to two CAN peripherals to each Data Hub.Connect up to two CAN peripherals to each Data Hub..

AIM MyChron Rotax Coolant Temperature Sensor M10This thermoresistive Water Temperature sensor is for use with AiM MyChron3, MyChron4 and MyChron 5 and 2T versions of kart dashes. The sensor has M10 male threads for easy installation in Rotax engines. The sensor lead has a 719 push-on connector, that connects to a 3-pin 712 screw-in a..

AIM Mychron 5 & 4 EGT Thermocouple Sensor - ICC Pipe (KZ/KF Homologated)AiM EGT Sensor designed for KZ & KF homoligated exhaust pipes. Easily connects with any K-Type (two blade flat yellow) connector and threads onto your KZ or KF homologated exhaust pipes sach as IAME, ROK, DeBei, TM and many others. Install this AiM Mychron 3/4/5 EG..

AIM Mychron 5 & 4 EGT Thermocouple SensorThe K-type (two blade flat) connector on any MyChron thermocouple requires either a MyChron K-Type to 3 Pin 712 Patch Cable (Part No. AIM-MC-008) for Kart dashes or a MyChron K-Type to 4 pin 712 Patch Cable (Part No. AIM-MC-208) for MyChron3 XG-Log Auto dash. MyChron3 Gold Auto and My..

AIM MyChron 14mm CHT Sensor - Underplug Air CooledAiM CHT (Cylinder Head Temperature) Sensor Kit that fits under a 14mm spark plug and has a K-Type connector to go to your AiM Mychron 2T. Install this AiM Mychron 14mm Under Plug CHT sensor under the spark plug of most air cooled engines like the LO-206, Yamaha KT100 and most every Honda out th..

AiM MyChron 14mm CHT Sensor - Underplug Air CooledInstall this CHT Thermocouple between the head and spark plug (under the spark plug hex) to monitor temperatures ranging from 0 to 572° F (up to 300° C). Fits 14mm spark plugs. 0.7" thick sensing ring. 1 meter (40 inch) cable.This is the Briggs LO206 temperature cable to go to your MyChron 4 or MyCh..